Shop | STAURATEC

Cleanroom Testing
Gas Network Testing
Process Equipment Testing
Active Air Samplers

HEPA Filter Integrity Test Verify the absence of leaks or defects in HEPA filters, which are critical to air purification. 1.00 € 1.0 EUR	Air Flow Rate Measurement and Air Change Rate Calculation Determine the quantity of fresh air supplied to and extracted from the cleanroom, and calculate the number of air changes per hour. 1.00 € 1.0 EUR	Airflow Laminarity Measurement Assess the quality of the unidirectional (laminar) airflow, in which the air moves in parallel layers without turbulence. 1.00 € 1.0 EUR	Pressure Cascade Measurement Verify that the differential pressures between adjacent areas are correctly established, with a higher pressure in the cleaner areas. 1.00 € 1.0 EUR
Filter Pressure Drop Measurement Determine the resistance to air flow through a filter, which may indicate clogging or obstruction. 1.00 € 1.0 EUR	Two-Point Calibration of a Pressure Gauge Verify the accuracy of a pressure gauge by comparing it against a calibration reference at two different pressure points. 1.00 € 1.0 EUR	Cleanroom Particle Counting Determine the number of particles of different sizes present in the cleanroom air. 1.00 € 1.0 EUR	Decontamination Cycle Eliminate or reduce the number of viable micro-organisms present in the cleanroom and on surfaces. 1.00 € 1.0 EUR
Airborne Microbiological Sampling Take air samples to determine the presence and quantity of viable micro-organisms. 1.00 € 1.0 EUR	Surface Microbiological Sampling Take samples from surfaces (for example walls, floors and equipment) in order to determine the presence and quantity of viable micro-organisms. 1.00 € 1.0 EUR	Environmental Measurements and Mapping Assess and map the environmental parameters of the cleanroom, such as temperature, relative humidity and air velocity. 1.00 € 1.0 EUR	Filmed Airflow Visualisation Record videos of the airflows in order to analyse their direction, velocity and behaviour. 1.00 € 1.0 EUR
Airflow Rebalancing Adjust air flow rates and pressures to ensure effective ventilation and homogeneous air distribution. 1.00 € 1.0 EUR	Containment Leak Testing Identify and locate leaks in containment enclosures (for example isolators and extraction hoods) that could allow the release of hazardous substances. 1.00 € 1.0 EUR

Cleanroom Testing