The single Single-Compartment Circular Smoke Control Damper is a damper in smoke extraction duct systems. The dampers are designed to remove heat and combustion products (e.g. smoke) from a single fire compartment.

The damper is operated by an actuating mechanism. The dampers can be installed in different duct sizes with respect to the field of direct application to EN 1366-9.

TECHNICAL SPECIFICATIONS
Multiple dimensions, diameter 100 to 630 mm
The dampers are designed for smoke extraction duct systems with a max. negative pressure of 1,500 Pa or
max. positive pressure of 500 Pa.
The dampers are designed for a maximum air velocity of 15 m/s.
The temperature at the installation location is permitted within a range of -30°C to +50°C.

TECHNICAL DATA
The dampers are suitable for systems free from abrasive, chemical and adhesive particles.
The dampers are designed for macroclimatic zones with a mild climate to EN 60 72133.
The dampers can be installed in different duct sizes with respect to the field of direct application to EN 1366-9.
Compliant with EN 1363-1, parts A.1 and A.2, EN 1366-2, part 13 and EN 1366-10, part 9.

The single Single-Compartment Rectangular Smoke Control Damper is a damper in smoke extraction duct systems. The dampers are designed to remove heat and combustion products (e.g. smoke) from a single fire compartment.

The damper is operated by an actuating mechanism. The dampers can be installed in different duct sizes with respect to the field of direct application to EN 1366-9.

TECHNICAL SPECIFICATIONS
Multiple dimensions, 180 x 180 to 1,600 x 1,000 mm
The dampers are designed for smoke extraction duct systems with a max. negative pressure of -1,000 Pa or max. positive pressure of 500 Pa.
The dampers are designed for a maximum air velocity of 15 m/s
The max. permitted temperature is between -30°C and +50°C

TECHNICAL DATA
Compliant with EN 1363-1, parts A.1 and A.2, EN 1366-2, part 13 and EN 1366-10, part 9. Declaration of performance no. PM/SEDS/01/21/1
In the event of fire, the ventilation system opens the damper provided in order to remove the combustion products and heat from that section.
The dampers are designed for installation with a horizontal blade axis. The flow direction must be directed from the actuation side.

The Multi-Compartment Single-Blade Smoke Control Damper is a damper in smoke extraction duct systems. The dampers are designed to remove heat and combustible products (e.g. smoke) from a fire compartments. In the event of fire, the Smoke and Fire ventilation system opens the damper in the affected section and removes the combustion products and heat from that section.

The damper blade is controlled by an electric actuating mechanism.

The dampers are fire resistant and are intended for manually or automatically activated systems.

The dampers are designed for use in fire compartments that may be connected to smoke

extraction ducts (tested to EN 1366-8) or they may be installed in or on the fire compartment construction.

TECHNICAL SPECIFICATIONS
Multiple dimensions: 180 x 180 to 1,600 x 1,000 mm
Maximum air velocity 15 m/s
Max. negative pressure -1,500 Pa or max. positive pressure 500 Pa.
The temperature at the installation location is permitted within a range of -30°C to +50°C

TECHNICAL DATA
The dampers can be installed in an arbitrary position (horizontal or vertical blade axis).
The dampers are designed for macroclimatic zones with a mild climate to EN 60 721-3-3.
CE certified acc. to EN 12101-8
Tested in compliance with EN 1366-10
Classified acc. to EN 13501-4+A1
Fire resistance to Tab. 1.2.1
External casing leakage class C, internal leakage min. class 2 acc. to EN 1751
Cycle testing to class Cmod acc. to EN 12101-8
Certificate of constancy of performance no. 1391-CPR-2021/0008
Declaration of Performance No. PM/SEDM/01/21/4
Hygiene assessment of fire dampers – Report no. 1.6/pos/19/19c

The Multi-Compartment Multi-Blade Smoke Control Damper is a closure in smoke extraction duct devices. In the event of fire, the smoke and heat exhaust system opens the dampers in the affected section, thereby allowing the extract fans to remove the combustion products and heat from the areas at risk.

The damper is fire resistant and is designed for automatically or manually activated systems.

Smoke control dampers are intended for use in spaces comprising several fire compartments, which may be connected by a smoke extraction duct tested to EN 1366-8 or may be installed in the fire compartment construction.

TECHNICAL SPECIFICATIONS
Multiple dimensions: 200 x 430 to 1,200 x 2,030 mm
Maximum air flow velocity 12 m/s
Maximum negative pressure up to 1,000 Pa or positive pressure up to 500 Pa
Temperature limit from -30°C to 50°C.

TECHNICAL DATA
The dampers are suitable for installation in a vertical position, with the blade axis horizontal.
The dampers are designed for weather-protected environments with class 3K5 climatic conditions, without condensation, frost or ice formation, and without water from sources other than rain
Tested to EN 1366-10
Classified to EN 13501-4 + A1
Fire resistance to Tab. 1.3.1
Pressure class 2 (negative pressure 1,000 Pa / positive pressure 500 Pa)
Leak-tightness to EN 1751
Cmod cycling to EN 12101-8
Certificate no. 1391-CPR-2021/0009
Declaration of performance no. PM/SEDM-L/01/21/1

The Multi-Compartment Rectangular Smoke Control Damper is a shut-off device in smoke extraction duct systems. The dampers are designed to remove heat and combustible products (e.g. smoke) from the affected fire compartments. In the event of fire, the ventilation system opens the damper in the affected section and removes the combustion products and heat.

The damper blade is controlled by an electric actuating mechanism. The dampers are fire resistant and are intended for automatically activated systems. Dampers can be installed in the fire compartment construction.

TECHNICAL SPECIFICATIONS
Multiple dimensions: 160 x 180 to 1,500 x 800 mm
Maximum air velocity 15 m/s
Max. negative pressure -1,500 Pa or max. positive pressure 500 Pa.
Max. permitted temperature from -30°C to +50°C.

TECHNICAL DATA
The dampers can be installed in an arbitrary position (horizontal or vertical blade axis).
The dampers are designed for macroclimatic zones with a mild climate to EN 60 721-3-3.
CE certified acc. to EN 12101-8
Tested in compliance with EN 1366-10
Classified acc. to EN 13501-4+A1
Fire resistance to Tab. 1.2.1. and 1.2.2.
External casing leakage class min. C acc. to EN 175

The Multi-Compartment Circular Smoke Control Damper is a shut-off device in smoke extraction duct systems. The dampers are designed to remove heat and combustible products (e.g. smoke) from the affected fire compartments. In the event of fire, the ventilation system opens the damper in the affected section and removes the combustion products and heat.

The damper blade is controlled by an electric actuating mechanism. The dampers are fire resistant and are intended for automatically activated systems. Dampers can be installed in the fire compartment construction

TECHNICAL SPECIFICATIONS
Multiple dimensions: diameter 180 to 630 mm
Maximum air velocity 15 m/s
Max. negative pressure -1,500 Pa or max. positive pressure 500 Pa.
Max. permitted temperature from -30°C to +50°C.

TECHNICAL DATA
The dampers can be installed in an arbitrary position (horizontal or vertical blade axis).
The dampers are designed for macroclimatic zones with a mild climate to EN 60 721-3-3.
CE certified acc. to EN 12101-8
Tested in compliance with EN 1366-10
Classified acc. to EN 13501-4+A1
Fire resistance to Tab. 1.2.1. and 1.2.2.
External casing leakage class min. C acc. to EN 175