The 120 min / 500 Pa intumescent fire damper withstands seismic events and is perfectly suited to applications requiring high pressures and high air flows.

TECHNICAL SPECIFICATIONS
Min. size: 200 x 200 x 450 mm
Max. size: 1000 x 1000 x 450 mm
Max. air velocity 20 m/s
Max. pressure difference 500 Pa

TECHNICAL DATA
CE certified to EN 15650
Tested to EN 1366-2
Classified to EN 13501-3+A1
Fire resistance EIS 120
External casing leakage class C,
Internal leakage class 2 to EN 1751
Corrosion resistant to EN 15650
Cycling test to class C10,000 to EN 15650
Damper with mechanical, electrical, pneumatic or electromechanical actuation. Pneumatic control makes direct connection to the SWAGELOK system straightforward.
Plain bearings - maintenance-free design withstanding high-level seismic loads
Earthquake resistant (high resistance)
Guaranteed 40-year service life

The Intumescent Fire Damper 180 min / 500 Pa withstands seismic events and is perfectly suited to applications requiring high pressures and high air flows.

TECHNICAL SPECIFICATIONS
Min. dimensions: 150 x 150 mm
Max. dimensions: 1,500 x 800 mm
Max. air velocity 12 m/s
Max. pressure differential 500 Pa

TECHNICAL DATA
Fire resistance up to EI 180 S
Leak-tightness to EN 1751, class C, and through the blade, class 2
Damper operation mechanical or by means of an actuator
Corrosion resistance compliant with EN 15650
Cycle test C10000 or Cmod (depending on actuator type) compliant with EN 15650
CE certification compliant with EN 15650
Tested in compliance with EN 1366- 2
Classified in compliance with EN 13501- 3+A1
Design certified for explosion-risk environments

The Intumescent Fire Damper 120 min / 1500 Pa withstands seismic events and is perfectly suited to applications requiring high pressures and high air flows.

TECHNICAL SPECIFICATIONS
Min. dimensions: 200 x 200 x 600 mm
Max. dimensions: 1,000 x 1,000 x 600 mm
Max. air velocity 16 m/s
Max. pressure differential 1,500 Pa

TECHNICAL DATA
Fire resistance EI 120 S
Galvanised steel, painted carbon steel or stainless steel
Seismic resistance defined to RRS (DBE, APC)
CE certification compliant with EN 15650
Tested in compliance with EN 1366- 2
Classified in compliance with EN 13501- 3+A1
Minimum service life 30 years (maintenance-free design)

The Intumescent Fire Damper 180 min / 5000 Pa is a product developed to meet the requirements of special, highly technical projects according to their fields of application.

The Intumescent Fire Damper 180 min / 5000 Pa was nominated for best product in the “safety and innovation” category at the WNE 2023 exhibition

TECHNICAL SPECIFICATIONS
Dimensions: min. Ø200, max. 800 mm (circular design only, extension connection to square ductwork possible)
Stainless steel – casing thickness 3 – 6 mm, welded construction with pickling and passivation
Max. air velocity 35 m/s
Tested pressure differential 23,000 Pa
Seismically resistant (high resistance)
Pressure tightness – blade closed max. 14 l/m²/min at 1.1 bar (tested on both sides of the blade)
Operates at temperatures up to 220 °C
Safe cycles with no loss of leak-tightness / fire resistance of at least 20,000
Usable in a magnetic field up to 126 mT
Radiation resistance up to 100 kGy
Suitable for explosion-risk areas class II 3 / 3G c IIB + H2 TX

TECHNICAL DATA
Can be installed in any position within a rigid wall or ceiling, on solid walls, on ceilings with additional insulation and in ductwork installations with rock wool insulation
Decontaminable
Guaranteed 40-year service life
Certified for low voltage and electromagnetic compatibility
The IP rating of the actuators / pneumatic actuators / limit switches is 65
Can be used as a high leak-tightness and pressure-resistant fire damper, a pressure-tight damper or a fire damper
Electric actuator (e.g. AUMA, Bernard Controls, SIPOS) or pneumatic actuator (STASTO-VALBIA), with limit switches (e.g. Petercem, Telemechanique, Honeywell)
Tested to EN 1366-2, classified to EN 13501-3, CE certified to EN 15650
Fire rating EI 180 ve, ho (i ↔ o) S